MY COURSES0
MY COURSES0

Enhance your skills on a journey to AM excellence

Participate in our standard courses and advanced customized workshops together with your team or at your own pace through online learning. No matter your experience in additive manufacturing, find out what courses can support your AM journey.

Attend our scheduled AM courses


Course dates


Discover our full course portfolio below

Designer
Step 1

Understand the potential of AM

This step will help you understand the possibilities, impact, economics and different technologies within AM

E-learning platform
E-learning platform
Description: Several, short (1-3 hours per module), on-demand basic Additive Manufacturing (AM) courses will be offered to participants. The courses… Read More
AM Fundamentals
AM Fundamentals
Description This course is part of the first step in the AM journey. It gives an overview of the different… Read More
Application along the value chain
Application along the value chain
Description This course is part of the first step in the AM journey. It covers what is currently done in… Read More
Step 2

Detect and redesign a case: 1st case realized

You will broaden your knowledge in design for the additive process

Design for AM
Design for AM
Description This course specific for designers aims to help them understand the basics of design for additive manufacturing. After this… Read More
AM material properties for designers
AM material properties for designers
Description This course specific for designers aims to gives an overview of the different materials available in AM. It focuses… Read More
Application development
Application development
Description This collaborative workshop happens once you have an application or an idea in mind, either by yourself or following… Read More
Part screening theory
Part screening theory
Description This course gives the tools to be able to screen part for Additive Manufacturing. It is based on a… Read More
Hands on training
Hands on training
Description This practical workshop will allow participants to experience production with Additive Manufacturing at AMEXCI’s state-of-the-art facility in Karlskoga. An… Read More
Part screening my own component (exercise)
Part screening my own component (exercise)
Description This practical workshop focuses on finding parts within your products portfolio that can be potentially be manufactured using additive… Read More
Step 3

Design development considering entire manufacturing process

You will master design, considering the whole manufacturing process

Heat exchangers
Heat exchangers
Description This course covers one of the areas that has a lot of application in additive manufacturing: heat exchangers. During… Read More
Review of the AM standards
Review of the AM standards
Description This course module focuses on standards for AM. It gives an overview of the available standards that are relevant… Read More
Post processing for designers
Post processing for designers
Description This advanced course for designers focuses on the steps that follows printing. It covers different post processing technologies available… Read More
Application of AM in tooling and spare parts
Application of AM in tooling and spare parts
Description This course aims to to show how to use AM specifically for tooling and spare parts to support production. Read More
Build Simulation
Build Simulation
Description In this Laser Powder Bed Fusion technology focused course, you will discover how build simulation can help save time… Read More
Sustainability
Sustainability
Description This course covers the different aspects of sustainability in AM. It goes through some examples of Life Cycle Analysis… Read More
Design methods and software for AM
Design methods and software for AM
Description This advanced course focuses on advanced design methods for AM. You will gain knowledge about methods and softwares that… Read More
Manager
Step 1

Understand the potential of AM

This step will help you understand the possibilities, impact, economics and different technologies within AM

E-learning platform
E-learning platform
Description: Several, short (1-3 hours per module), on-demand basic Additive Manufacturing (AM) courses will be offered to participants. The courses… Read More
AM Fundamentals
AM Fundamentals
Description This course is part of the first step in the AM journey. It gives an overview of the different… Read More
Introduction to cost of AM
Introduction to cost of AM
Description This course is part of the first step in the AM journey. It covers what is currently done in… Read More
Market overview
Market overview
Description This course module covers the AM market and give an overview on how the AM ecosystem works, who are… Read More
Application along the value chain
Application along the value chain
Description This course is part of the first step in the AM journey. It covers what is currently done in… Read More
Step 2

Start to implement AM in your team

This step will offer you the tools to develop successful business cases

Define AM strategy within my company
Define AM strategy within my company
Description In this interactive workshop, we start by identifying the AM sweet sports within your organization. Once the sweet spots… Read More
Define AM business case
Define AM business case
Description This practical workshop aims to run through some applications and validate their business case. It goes through technical feasability,… Read More
Part screening my own component (exercise)
Part screening my own component (exercise)
Description This practical workshop focuses on finding parts within your products portfolio that can be potentially be manufactured using additive… Read More
Part screening theory
Part screening theory
Description This course gives the tools to be able to screen part for Additive Manufacturing. It is based on a… Read More
Step 3

AM adoption roadmap

This step will support you in creating a successful AM roadmap

Sustainability
Sustainability
Description This course covers the different aspects of sustainability in AM. It goes through some examples of Life Cycle Analysis… Read More
Markets and trends
Markets and trends
Description This course covers the AM market and give an overview on how the AM ecosystem works, who are the… Read More
Advanced cost calculations and cost trends
Advanced cost calculations and cost trends
Description This interactive course aims at better understanding how is the AM market cost trends and what are the cost… Read More
Cost breakdown – component
Cost breakdown - component
Description This course goes into the details on how to detail the costs of a printed part. It focuses on… Read More
Make or buy strategy
Make or buy strategy
Description This interactive workshop aims at better understand the key elements required to decide a Make or a Buy strategy. Read More
Procurement
Step 1

Understand the potential of AM

This step will help you understand the possibilities, impact, economics and different technologies within AM

E-learning platform
E-learning platform
Description: Several, short (1-3 hours per module), on-demand basic Additive Manufacturing (AM) courses will be offered to participants. The courses… Read More
AM Fundamentals
AM Fundamentals
Description This course is part of the first step in the AM journey. It gives an overview of the different… Read More
Application along the value chain
Application along the value chain
Description This course is part of the first step in the AM journey. It covers what is currently done in… Read More
Step 2

Sourcing your first component

In this step you will learn how to identify suppliers

Cost breakdown – optimization
Cost breakdown - optimization
Description This course goes into the details on how to detail the costs of a printed part. It focuses on… Read More
Cost breakdown – component
Cost breakdown - component
Description This course goes into the details on how to detail the costs of a printed part. It focuses on… Read More
Part screening theory
Part screening theory
Description This course gives the tools to be able to screen part for Additive Manufacturing. It is based on a… Read More
Step 3

How to get the most of the AM market?

This step will show you how to qualify suppliers

Sustainability
Sustainability
Description This course covers the different aspects of sustainability in AM. It goes through some examples of Life Cycle Analysis… Read More
In depth Market view with focus on part suppliers
In depth Market view with focus on part suppliers
Description This interactive session aims at better understand how is the AM market and what are the current trends for… Read More
Markets and trends
Markets and trends
Description This course covers the AM market and give an overview on how the AM ecosystem works, who are the… Read More
Procurement guidelines
Procurement guidelines
Description This interactive workshop will help define guidelines for procurement. It covers the key points to take into consideration when… Read More
Make or buy strategy
Make or buy strategy
Description This interactive workshop aims at better understand the key elements required to decide a Make or a Buy strategy. Read More
Supply chain
Step 1

Understand the potential of AM

This step will help you understand the possibilities, impact, economics and different technologies within AM

E-learning platform
E-learning platform
Description: Several, short (1-3 hours per module), on-demand basic Additive Manufacturing (AM) courses will be offered to participants. The courses… Read More
AM Fundamentals
AM Fundamentals
Description This course is part of the first step in the AM journey. It gives an overview of the different… Read More
Application along the value chain
Application along the value chain
Description This course is part of the first step in the AM journey. It covers what is currently done in… Read More
Step 2

Supplier identification

You will learn how to source components

Cost breakdown – buffer stock
Cost breakdown - buffer stock
Description This course module focuses specifically on the question of buffer costs in additive manufacturing. It goes through how AM… Read More
Cost breakdown – optimization
Cost breakdown - optimization
Description This course goes into the details on how to detail the costs of a printed part. It focuses on… Read More
Cost breakdown – component
Cost breakdown - component
Description This course goes into the details on how to detail the costs of a printed part. It focuses on… Read More
Value creating along supply chain
Value creating along supply chain
Description This course aims to better understand how AM solutions are disrupting the supply chains. Through various application examples, it… Read More
Part screening theory
Part screening theory
Description This course gives the tools to be able to screen part for Additive Manufacturing. It is based on a… Read More
Step 3

Supplier qualification

You will learn how to develop a robust supply chain

Sustainability
Sustainability
Description This course covers the different aspects of sustainability in AM. It goes through some examples of Life Cycle Analysis… Read More
In depth Market view with focus on part suppliers
In depth Market view with focus on part suppliers
Description This interactive session aims at better understand how is the AM market and what are the current trends for… Read More
Markets and trends
Markets and trends
Description This course covers the AM market and give an overview on how the AM ecosystem works, who are the… Read More
Supplier management and production improvement
Supplier management and production improvement
Description This course focuses on identifying the factors that impacts quality and productivity and how to monitor them. Objectives What… Read More
Make or buy strategy
Make or buy strategy
Description This interactive workshop aims at better understand the key elements required to decide a Make or a Buy strategy. Read More
Supplier qualification guidelines
Supplier qualification guidelines
Description This course covers the qualification guidelines for sourcing a component. What should be considered when qualifying a supplier, and… Read More
Quality
Step 1

Understand the potential of AM

This step will help you understand the possibilities, impact, economics and different technologies within AM

E-learning platform
E-learning platform
Description: Several, short (1-3 hours per module), on-demand basic Additive Manufacturing (AM) courses will be offered to participants. The courses… Read More
AM Fundamentals
AM Fundamentals
Description This course is part of the first step in the AM journey. It gives an overview of the different… Read More
Application along the value chain
Application along the value chain
Description This course is part of the first step in the AM journey. It covers what is currently done in… Read More
Step 2

1st part controlled

Challenges with DT and NDT in AM
Challenges with DT and NDT in AM
Description This course will go through the different Destructive and Non Destructive tests techniques used to control Additive Manufacturing materials… Read More
Factors influencing quality
Factors influencing quality
Description This course will go in-depth on the technical variables, to highlight which one are impacting the quality of the… Read More
Step 3

Go further in qualification

In this step you will learn how to define documents and procedures for the qualification process

Sustainability
Sustainability
Description This course covers the different aspects of sustainability in AM. It goes through some examples of Life Cycle Analysis… Read More
Supplier management and production improvement
Supplier management and production improvement
Description This course focuses on identifying the factors that impacts quality and productivity and how to monitor them. Objectives What… Read More
Qualification of my AM process
Qualification of my AM process
Description The workshop is targeted towards machine owners that would like to move into manufacturing of qualified parts. Participants will… Read More
Define testing plan
Define testing plan
Description This interactive workshops aims to help you define a testing plan for AM parts and its challenges like customization… Read More
Prepare for qualification of my component
Prepare for qualification of my component
Description The workshop focuses on how to qualify components. It covers questions specific to AM like traceability, customization. At the… Read More
Production engineer
Step 1

Understand the potential of AM

This step will help you understand the possibilities, impact, economics and different technologies within AM

E-learning platform
E-learning platform
Description: Several, short (1-3 hours per module), on-demand basic Additive Manufacturing (AM) courses will be offered to participants. The courses… Read More
AM Fundamentals
AM Fundamentals
Description This course is part of the first step in the AM journey. It gives an overview of the different… Read More
Application along the value chain
Application along the value chain
Description This course is part of the first step in the AM journey. It covers what is currently done in… Read More
Step 2

Support my production lines

This step will teach you how to develop and screen applications that support production

Hands on training
Hands on training
Description This practical workshop will allow participants to experience production with Additive Manufacturing at AMEXCI’s state-of-the-art facility in Karlskoga. An… Read More
Part screening my own component (exercise)
Part screening my own component (exercise)
Description This practical workshop focuses on finding parts within your products portfolio that can be potentially be manufactured using additive… Read More
Part screening theory
Part screening theory
Description This course gives the tools to be able to screen part for Additive Manufacturing. It is based on a… Read More
Factors influencing quality
Factors influencing quality
Description This course will go in-depth on the technical variables, to highlight which one are impacting the quality of the… Read More
Application of AM in tooling and spare parts
Application of AM in tooling and spare parts
Description This course aims to to show how to use AM specifically for tooling and spare parts to support production. Read More
Step 3

Industrialize

you will learn how to develop standards for the AM workflow

Health and safety
Health and safety
Description This course guides you into the health and safety recommendations when you want to implement printing capacity onsite. It… Read More
Sustainability
Sustainability
Description This course covers the different aspects of sustainability in AM. It goes through some examples of Life Cycle Analysis… Read More
Review of the AM standards
Review of the AM standards
Description This course module focuses on standards for AM. It gives an overview of the available standards that are relevant… Read More
Supplier management and production improvement
Supplier management and production improvement
Description This course focuses on identifying the factors that impacts quality and productivity and how to monitor them. Objectives What… Read More
Qualification of my AM process
Qualification of my AM process
Description The workshop is targeted towards machine owners that would like to move into manufacturing of qualified parts. Participants will… Read More
AM shopfloor setting up
AM shopfloor setting up
Description This workshop will focus on how to define your AM production unit, detailing what are the specifities of each… Read More
Build Simulation
Build Simulation
Description In this Laser Powder Bed Fusion technology focused course, you will discover how build simulation can help save time… Read More
AM expert
Step 1

Broaden knowledge in AM

You will broaden your knowledge in other AM processes

E-learning platform
E-learning platform
Description: Several, short (1-3 hours per module), on-demand basic Additive Manufacturing (AM) courses will be offered to participants. The courses… Read More
AM Fundamentals
AM Fundamentals
Description This course is part of the first step in the AM journey. It gives an overview of the different… Read More
Application along the value chain
Application along the value chain
Description This course is part of the first step in the AM journey. It covers what is currently done in… Read More
Markets and trends
Markets and trends
Description This course covers the AM market and give an overview on how the AM ecosystem works, who are the… Read More
Step 2

Consolidate knowledge about an AM process

You will consolidate your knowledge about an AM process

Going further in post processing
Going further in post processing
Description In this course, you will into details of the different post processing technologies used for AM parts: (heat treatment,… Read More
Sustainability
Sustainability
Description This course covers the different aspects of sustainability in AM. It goes through some examples of Life Cycle Analysis… Read More
Design methods and software for AM
Design methods and software for AM
Description This advanced course focuses on advanced design methods for AM. You will gain knowledge about methods and softwares that… Read More
Define testing plan
Define testing plan
Description This interactive workshops aims to help you define a testing plan for AM parts and its challenges like customization… Read More
Challenges with DT and NDT in AM
Challenges with DT and NDT in AM
Description This course will go through the different Destructive and Non Destructive tests techniques used to control Additive Manufacturing materials… Read More
Prepare for qualification of my component
Prepare for qualification of my component
Description The workshop focuses on how to qualify components. It covers questions specific to AM like traceability, customization. At the… Read More
Going further in printing
Going further in printing
Description This course gives first an update on the lastest development in design and printing linked to a specific technology… Read More
Step 3

Deepening AM knowledge

You will deepen your knowledge in AM

Set up my own materials
Set up my own materials
Description This course gives you a key understanding of on the methodology of how to develop parameters for new materials… Read More
Improve the quality of printed parts
Improve the quality of printed parts
Description This course covers various topics like what are the different technologies available for process monitoring, how can I ensure… Read More
Advanced course in one technology
Advanced course in one technology
Description This course is aimed at people who are already using a printer and want to know more about the… Read More
Full course list
Step 1

Test

AM Fundamentals
AM Fundamentals
Description This course is part of the first step in the AM journey. It gives an overview of the different… Read More
Advanced course in one technology
Advanced course in one technology
Description This course is aimed at people who are already using a printer and want to know more about the… Read More

Meet our Innovation team and find out how they can support your Additive Manufacturing project

The Innovation team plays an important role at AMEXCI. From providing answers to your initial questions related to Additive Manufacturing, to developing long-term projects, our innovation team supports you from the very beginning of your AM journey until its end.

This course gave a very good overview touching all aspects of AM, from processes and materials to quality, key actors and trends. Well presented by passionate speakers

Henrik Hindsefelt, Combitech

Additive Manufacturing State of the Art

Well designed course. A fact dense learning experience

Bengt Andersson, Ericsson

Metal AM Fundamentals

Very good training for all designers that are new to AM for serial production

Christian Berger, Leybold

Additive Manufacturing Worksop series

Our approach

State of the art material

All course material used throughout our workshops is constantly updated and reviewed.

Experience in the field

Our courses will be led by experienced professionals in their respective fields.

Access to technology

You will get constant access to the latest equipment for testing and printing.

Hands-on learning

Our courses consist of a tested mix between discussions, exercises and prototypes from physical parts.

Objectivity

We are completely agnostic of any technology or supplier.

Tangible outcomes

We apply all courses to your individual situation and application. You will leave with valuable insights.

0 +

AM professionals trained at AMEXCI

0 %

Of our workshops directly lead to follow-up projects

0 %

Of participants would recommend our courses

AMEXCI Newsletter

Are you curious about what's happening at AMEXCI, and in the AM world? Subscribe to our newsletter AMEXCI Tech Watch, and receive additive manufacturing insights directly in your inbox.

Contact our Innovation team

Maxime Legrand

Maxime Legrand

Innovation Manager

Shanwei Guo

Shanwei Guo

Innovation Manager