Do you want to transform your digital file into a physical part?

Then this is the section for you! We are here to bring your idea into reality and there is no such thing as impossible for our application engineering team. Reach out and we’ll get back to you within 24 hours. 


All project inquiries are handled based on client specific needs. Through our extended AM network, we are able to provide clients with comprehensive and additional additive manufacturing technologies and materials. Please contact us for more information.




2 x EOS M 290


The Benchmark for the industrial 3D printing of High-Quality Metal Parts – with Enhanced Quality Management Features

Inconel 718 (Ni-base)
Ti6-4 (Ti-base)
AlSi10Mg (Al-base)
SS 316L, 17-4PH, CX, GP1, (Stainless Steel) (Fe-base)
MS1 (Maragin Steel) (Fe-base)

Build volume
250 mm x 250 mm x 325 mm (9.85 x 9.85 x 12.8 in)

Comprehensive quality assurance
A comprehensive monitoring suite enables to conduct a real-time quality assurance of all production and quality relevant data. EOSTATE is composed of five different monitoring systems – System, Laser, PowderBed, MeltPool, and Exposure OT (optical tomography).

Aconity MIDI


Equipped with an optional second process chamber, this system allows parallelizing setup times while the main system is still producing. Additionally, process monitoring or high-temperature preheating of up to 1200°C is also available for this system.

Metal powders

Build volume
Ø 170 mm x H 200 mm

Preheating temp/build space
500°C / Ø 170 mm x H 150 mm
800°C / Ø 100 mm x H 150 mm
1200°C / Ø 70 mm x H 150 mm
As for all ACONITY systems, the ACONITY MIDI is equipped with the AconitySTUDIO control software which allows access to all relevant process parameters and machine components.


EOS P 396


EOS P 396 is a proven system with good reliability and performance. Used in commercial applications as BMW (tailor made interior) or Chanel (mascara brushes) at AMEXCI we use it for prototyping and final parts.

Technical data EOS P 396

Polymer PA2200
(Other available on request)

Build volume
340 mm x 340 mm x 600 mm (13.4 x 13.4 x 26,6 in)



MARKEFORGED X7 is a FDM system combining nylon and fibre (chopped and continuous) to create high strength polymer based components. Suitable for fixtures, tools and engineering applications. Continuous Carbon Fibre parts stand up to gthe toughest applications. Stronger than 6061 Aluminium and 40% lighter – these parts are perfect for manufacturing equipment, jaws, tooling, and end-use parts.

Technical data MARKFORGED X7

Onyx (Chopped Carbon Fibre)
Continuous fibre reinforcement (Carbon, Glass, Kevlar)

Build Volume
330 mm x 270 mm x 200 mm

If you want to manufacture your parts or discuss your ideas, don't hesitate to contact us! We are here for you.

Joel Andersson


Alexander Magnusson


Marcus Axelsson

We are using cookies to give you the best experience. You can find out more about which cookies we are using or switch them off in privacy settings.
AcceptPrivacy Settings


  • Cookies
  • Personal Data
  • Data collection
  • Use of Personal data


We use cookies to improve the quality of our service and to better understand how people use our website. We do this by storing user preferences in cookies and by tracking user trends and patterns of how people navigate our site.

You can set your browser to refuse all cookies or to indicate when a cookie is being sent. However, some features or services on our website may not function properly without cookies.

Personal Data

Any personal data for example; (your name, telephone number or e-mail address) that indirectly or directly identifies your personally (“Personal data”) and which you transmit to our website (“the site”) by electronic mail or otherwise communicate to AMEXCI, will be handled by AMEXCI in accordance with the present privacy policy (“Privacy Policy”). Personal data can also include information that is available on the internet or publicly available information that we acquire from other services.

AMEXCI is committed to protecting your Personal data. This Privacy Policy outlines the information we collect and how we use that information. The Privacy policy is applicable to the sites of AMEXCI, its subsidiaries, affiliates, licensor or joint venture partners. AMEXCI AB is the controller of the Personal data processed. This Policy is designed to help visitors understand what information we gather from our Site, how we handle the information once we gather it and how to contact us of any questions regarding our processing of the data.

Data collection

You are free to explore our Site without providing any Personal data about yourself. When you visit the Site and register yourself through any form, we may request you enter your Personal data about yourself. This is used to provide you with requested information.

Use of Personal data

When you do provide us with Personal data, we use that information for the following purposes.:

  1. We store and process that information to better understand your needs and how we can improve our services.
  2. We (or fulfillment house on our behalf) use that information to contact you.


We do not now or in the future intend to sell, rent or market Personal data about you to third parties.

Sign up to our Newsletter

In this rapidly growing industry we see so many great news worthy of sharing. In this newsletter we will update you on the latest Additive Manufacturing news such as new technologies, innovative products or industry collaborations.

You can unsubscribe at any time by clicking the link in the footer of our emails. For information about our privacy practices, please visit our website. We use Mailchimp as our marketing platform. By clicking to subscribe, you acknowledge that your information will be transferred to Mailchimp for processing. Learn more about Mailchimp’s privacy practices here.